LH /L:1,24096 C:\DOS\MODE LPT1: RETRY=R
SET GMKW=C:\GMKW\
SET BITFAX=C:\Bfwin
LH /L:0;1,45536 /S C:\DOS\SMARTDRV.EXE H
:: @ECHO OFF
SET COMSPEC=C:\DOS\COMMAND.COM
PATH C:\DOS;C:\UTILS;C:\BIN
PATH %PATH%;C:GMKW
PATH=C:\MKS\BIN;%PATH%
PATH C:\windows;%PATH%
:: REM MKS ENVIRON LINES
SET GLOB=C:\MKS\BIN\GLOB.EXE
:: REM END OF MKS
SET SYMANTEC=C:\SYMANTEC
PROMPT $p$g
SET MFILE=C:\UTILS
SET TEMP=C:\DOS
:: =======================================================
:: =======================================================
GETSTAT /QW
:: ====================================================
:: ====================================================
set mouse=C:\UTILS
LH /L:0;1,24304 /S C:\UTILS\mouse.exe /Q
:: ==================================================
:: = To run RPAL, remove the REM from the RPAL line =
:: ==================================================
:: RPAL /I
:: ==================================================
:: = To run LM, remove the REM from the LM line and =
:: = place a REM in front of WIN /3.                =
:: ==================================================
:: LM
LH /L:1,6384 C:\DOS\doskey
:: WIN /3
:: ==================================================
:: = Check battery level and adjust power savings   =
:: ==================================================
GETSTAT /B
IF ERRORLEVEL 1 GOTO BATTERY
MPOWER ON >NUL
echo "modem is on"
GOTO DONE
:BATTERY
VERIFY ON
MPOWER OFF >NUL
echo "modem is off"
:DONE
:: ==================================================
:: Go to the section that matches the current value of the CONFIG variable
:: ==================================================
echo "customizing"
if NOT "%config%"=="network" goto network
echo "Network configuration"
SET CONFIGTEL=C:\NETWORK\CUTCP\CONFIG.TEL
PATH %PATH%;C:\network\cutcp
C:\NETWORK\PACKET\NE2000 -N -W 0X60 5 0X320
c:\network\qvtnet\pktint.com
win c:\network\qvtnet\wnqvtnet.exe
:network
if NOT "%config%"=="intersvr" goto intersvr
echo "Server configuration"
C:\DOS\intersvr
:intersvr
if NOT "%config%"=="windows" goto windows
echo "windows configuration"
win
:windows
if NOT "%config%"=="norton" goto norton
echo "Norton configuration"
:norton
if NOT "%config%"=="dos" goto dos
echo "Dos Configuration"
C:\DOS\keyb br
:dos