NAME
ATM intro - introduction to ATM network management commands
DESCRIPTION
This section contains an overview of commands that perform
various management functions for FORE Systems ATM networks;
each is described in detail in its own manual entry.
ATM SWITCH-RESIDENT SOFTWARE
The asxd and snmpd programs are run automatically whenever
the FORE Systems ASX ATM LAN switch is turned on. The asx-
test program should not normally be needed, and is incompa-
tible with normal operation of the ATM switch.
Name Appears on Page Description
asxd asxd(8C) ATM switch control daemon
snmpd atm_snmpd(8C) SNMP agent for ATM switch
asxtest asxtest(8C) ATM switch diagnostics
NETWORK MANAGEMENT COMMANDS FOR ATM SWITCHES
These programs are supplied with the FORE Systems ASX ATM
LAN switches. They are intended to be executed as desired
on a network management workstation. They are not necessary
for normal operation of the ATM switch.
Since these commands may interfere with normal operation of
the ATM network if improperly used, system administrators
should take appropriate measures to restrict their use.
Name Appears on Page Description
asxmon asxmon(8C) display ATM switch information via SNMP
cport cport(8C) ATM switch port management
cpath cpath(8C) ATM permanent virtual path management
cchan cchan(8C) ATM permanent virtual channel management
NETWORK MANAGEMENT COMMANDS FOR ATM COMPUTER INTERFACES
These programs are supplied with the FORE Systems ATM com-
puter interfaces. They are intended to be executed as
desired by the workstation administrator.
Since these commands may interfere with normal operation of
the ATM network if improperly used, system administrators
should take appropriate measures to restrict their use.
Name Appears on Page Description
snmpd atm_snmpd(8C) SNMP agent for ATM interface
atmarp atmarp(8C) manage IP-to-ATM address resolution
atmstat atmstat(8C) display ATM interface statistics
atmconfig atmconfig(8C) configure SPANS device